TsundereStation/src/core/gpu_hw.cpp
LibretroAdmin 7b575a3f87 core, common: route resolution_scale, true_color, scaled_dithering through batch cbuffer
Three per-session settings used to be baked into the HLSL / GLSL
source string at shadergen time:

  - RESOLUTION_SCALE: emitted as 'CONSTANT uint RESOLUTION_SCALE =
    N u;' at the top of every batch shader. VRAM_SIZE / RCP_VRAM_SIZE
    derived from it inline. Every distinct resolution scale produced
    a distinct source string -> distinct DXBC / GLSL blob.
  - TRUE_COLOR: DefineMacro'd as a #define, guarded around #if /
    #if ! / #else / #endif blocks in ApplyDithering, the textured
    colour-truncation path, the untextured non-DITHERING fallback,
    and the final colour premultiply. Two distinct source strings
    per shader cell (true_color on / off).
  - DITHERING_SCALED: DefineMacro'd as a #define around the dither
    fragment-coordinate selector in ApplyDithering. Two distinct
    source strings (scaled_dithering on / off).

Net result: each batch fragment shader cell could produce up to
~5 (typical resolution scales) x 2 x 2 = 20 distinct DXBC blobs
across a session's settings space, every one of them requiring a
fresh D3DCompile invocation on first encounter. On D3D12 with
shader precompilation Enabled and a cold disk cache, the
combinatorial explosion is exactly the 'roughly one minute initial
startup' pain.

This patch moves the three settings out of the source string and
into the per-batch uniform buffer. The HLSL / GLSL produced by
GenerateBatchFragmentShader / GenerateBatchVertexShader becomes
INVARIANT under those three settings - a session-state toggle is
a single 4-byte cbuffer write picked up on the next FlushRender,
with no shader recompile, no PSO rebuild, no batch matrix flush.

Mechanically:

  - BatchUBOData (gpu_hw.h) grows by 16 bytes:
      uint32_t u_resolution_scale;
      uint32_t u_true_color;       // bool packed as uint32_t
      uint32_t u_scaled_dithering; // same
      uint32_t u_pad0;             // pad to 16-byte cbuffer row
    The new fields are written from m_resolution_scale /
    m_true_color / m_scaled_dithering in two places: GPU_HW::
    Initialize after the member values are set, and
    GPU_HW::UpdateHWSettings right after the same members are
    updated. Both sites set m_batch_ubo_dirty = true so the next
    FlushRender uploads.

  - WriteCommonFunctions (gpu_hw_shadergen.cpp) gains a
    'batch_uniform_buffer' parameter (default false). When true it
    skips the file-scope 'CONSTANT uint RESOLUTION_SCALE = ...',
    'CONSTANT uint2 VRAM_SIZE = ...', and 'CONSTANT float2
    RCP_VRAM_SIZE = ...' emissions; the cbuffer + macro alias path
    supplies them instead. Non-batch shaders (VRAM fill / copy /
    write / read / update-depth, display, downsample) continue
    using the file-scope CONSTANT path - they're a handful of
    shaders with a much smaller combinatorial space and don't
    benefit from the cbuffer indirection.

  - WriteBatchUniformBuffer adds the three new cbuffer fields and
    a u_pad0 entry, then emits three preprocessor aliases:
      #define RESOLUTION_SCALE u_resolution_scale
      #define VRAM_SIZE (uint2(VRAM_WIDTH u, VRAM_HEIGHT u) *
                         u_resolution_scale)
      #define RCP_VRAM_SIZE (float2(1.0, 1.0) / float2(VRAM_SIZE))
    Every existing reference in the shader body keeps working as-is
    via macro substitution. VRAM_WIDTH / VRAM_HEIGHT stay
    compile-time literals - they are fixed PSX geometry (1024 x
    512), not session state.

  - GenerateBatchVertexShader / GenerateBatchFragmentShader call
    WriteBatchUniformBuffer BEFORE WriteCommonFunctions. The
    ordering matters: fixYCoord (defined inside
    WriteCommonFunctions) references RCP_VRAM_SIZE and VRAM_SIZE,
    which after the cbuffer-aware refactor are macros expanding to
    expressions involving u_resolution_scale. u_resolution_scale
    must be declared (cbuffer emitted) before the macros are
    expanded in fixYCoord's body, otherwise the HLSL / GLSL
    single-pass parser sees an undeclared identifier.

  - GenerateBatchFragmentShader drops the DefineMacro calls for
    TRUE_COLOR and DITHERING_SCALED, and the four #if (!)TRUE_COLOR
    / #if DITHERING_SCALED preprocessor blocks become runtime
    'if (u_true_color != 0u)' / 'if (u_scaled_dithering != 0u)'
    branches. These are uniform-control-flow branches on
    cbuffer-uniform values - free on every modern GPU. The inner
    RAW_TEXTURE / DITHERING / etc. #ifs remain compile-time
    because those dimensions are still structural in the batch
    matrix.

  - Shader cache file format versions bumped on D3D11 (2 -> 3),
    D3D12 (1 -> 2), and OpenGL (3 -> 4). Existing on-disk caches
    were keyed by HLSL / GLSL source hashes that included the
    inlined RESOLUTION_SCALE / TRUE_COLOR / DITHERING_SCALED
    literals; after this patch the source no longer contains those
    literals, so the hashes change. Bumping the file version
    forces a clean rebuild of the cache file on first launch
    rather than leaving stale entries to grow the file
    indefinitely.

Vulkan is unaffected at runtime. The Vulkan backend uses the
pre-baked SPIR-V templates under data/shaders/vulkan/*.glsl,
which handle RESOLUTION_SCALE / TRUE_COLOR / DITHERING_SCALED via
VkSpecializationInfo spec constants (IDs 0, 106, 105). Those
templates are independent of GPU_HW_ShaderGen; the runtime path
patches the spec consts at vkCreateGraphicsPipelines time and the
result is the same architectural shape this patch gives D3D11 /
D3D12 / OpenGL via the cbuffer.

Smoke checks:
  - Tree-wide grep confirms no DefineMacro for TRUE_COLOR or
    DITHERING_SCALED survives in gpu_hw_shadergen.cpp; only one
    explanatory comment references them by name.
  - u_resolution_scale / u_true_color / u_scaled_dithering are
    referenced in gpu_hw_shadergen.cpp (the cbuffer declaration
    plus the runtime branch sites), gpu_hw.cpp (the two write
    paths in Initialize and UpdateHWSettings), and gpu_hw.h
    (the BatchUBOData struct definition).

Test priority:
  - D3D12, shader cache nuked. Boot a game at default settings
    (resolution scale 4x, true_color off, scaled_dithering on,
    no MSAA, Nearest). Initial precompile_sync runs - it still
    has to compile ~120 fragment shader sources once, but they
    are now invariant under the three migrated settings.
    Subsequent toggles of true_color or scaled_dithering should
    no longer trigger any D3DCompile.
  - Toggle resolution scale (1x -> 4x -> 2x -> ...). The HLSL
    source is identical across all scale values; the cache
    should hit every time after the first compile pass. The
    framebuffer is still rebuilt (textures resize), and PSOs are
    still rebuilt (driver bytecode-to-ISA pass), but no fresh
    D3DCompile invocations.
  - Toggle true_color on and off mid-session. Visually identical
    behaviour to before this patch (24-bit vs 16-bit framebuffer
    look). No precompile pause.
  - Toggle scaled_dithering on and off mid-session. Visually
    identical dithering pattern behaviour. No precompile pause.
  - Same battery on D3D11 and OpenGL backends.
  - Vulkan: no behavioural change expected (still uses pre-baked
    SPIR-V via spec consts). Confirm filter / true_color /
    scaled_dithering toggles continue to be instant on revisit
    via the dim cache from earlier work.

This is patch 1 of the D3D12 startup work. Patch 2 will add the
pre-baked DXBC infrastructure (regen_d3d12_dxbc.py-style offline
tool plus .inc tables) that pre-baked SPIR-V did for Vulkan in
the glslang elimination series. With the source invariance from
this patch, the pre-bake size is bounded to the structural
matrix (~120 blobs for the default-user MSAA=1 / no-per_sample /
no-color-perspective case) rather than the full per-session
explosion.
2026-05-18 05:24:27 +02:00

1367 lines
53 KiB
C++

#include "gpu_hw.h"
#include "common/state_wrapper.h"
#include "cpu_core.h"
#include "gpu_sw_backend.h"
#include "pgxp.h"
#include "settings.h"
#include "system.h"
#include <cmath>
#include <cstring>
#include <sstream>
#include <tuple>
#define IS_POW2(value) (((value) & ((value) - 1)) == 0)
template<typename T>
ALWAYS_INLINE static constexpr std::tuple<T, T> MinMax(T v1, T v2)
{
if (v1 > v2)
return std::tie(v2, v1);
return std::tie(v1, v2);
}
ALWAYS_INLINE static bool ShouldUseUVLimits()
{
// We only need UV limits if PGXP is enabled, or texture filtering is enabled.
return g_settings.gpu_pgxp_enable || g_settings.gpu_texture_filter != GPUTextureFilter::Nearest;
}
ALWAYS_INLINE static bool ShouldDisableColorPerspective()
{
return g_settings.gpu_pgxp_enable && g_settings.gpu_pgxp_texture_correction && !g_settings.gpu_pgxp_color_correction;
}
GPU_HW::GPU_HW() : GPU()
{
m_vram_ptr = m_vram_shadow.data();
}
GPU_HW::~GPU_HW()
{
if (m_sw_renderer)
{
m_sw_renderer->Shutdown();
m_sw_renderer.reset();
}
}
bool GPU_HW::Initialize(HostDisplay* host_display)
{
if (!GPU::Initialize(host_display))
return false;
m_resolution_scale = CalculateResolutionScale();
m_multisamples = std::min(g_settings.gpu_multisamples, m_max_multisamples);
m_render_api = host_display->GetRenderAPI();
m_per_sample_shading = g_settings.gpu_per_sample_shading && m_supports_per_sample_shading;
m_true_color = g_settings.gpu_true_color;
m_scaled_dithering = g_settings.gpu_scaled_dithering;
m_texture_filtering = g_settings.gpu_texture_filter;
m_using_uv_limits = ShouldUseUVLimits();
m_chroma_smoothing = g_settings.gpu_24bit_chroma_smoothing;
m_downsample_mode = GetDownsampleMode(m_resolution_scale);
m_disable_color_perspective = m_supports_disable_color_perspective && ShouldDisableColorPerspective();
m_shader_precompile_mode = g_settings.gpu_shader_precompile_mode;
if (m_multisamples != g_settings.gpu_multisamples)
{
g_host_interface->AddFormattedOSDMessage(
20.0f, g_host_interface->TranslateString("OSDMessage", "%ux MSAA is not supported, using %ux instead."),
g_settings.gpu_multisamples, m_multisamples);
}
if (!m_per_sample_shading && g_settings.gpu_per_sample_shading)
{
g_host_interface->AddOSDMessage(
g_host_interface->TranslateStdString("OSDMessage", "SSAA is not supported, using MSAA instead."), 20.0f);
}
if (!m_supports_dual_source_blend && TextureFilterRequiresDualSourceBlend(m_texture_filtering))
{
m_texture_filtering = GPUTextureFilter::Nearest;
}
if (!m_supports_adaptive_downsampling && g_settings.gpu_resolution_scale > 1 &&
g_settings.gpu_downsample_mode == GPUDownsampleMode::Adaptive)
{
g_host_interface->AddOSDMessage(
g_host_interface->TranslateStdString(
"OSDMessage", "Adaptive downsampling is not supported with the current renderer, using box filter instead."),
20.0f);
}
m_pgxp_depth_buffer = g_settings.UsingPGXPDepthBuffer();
// Seed the per-session cbuffer fields. m_batch_ubo_dirty defaults
// to true so the first FlushRender uploads these; subsequent
// sessions update them in UpdateHWSettings below.
m_batch_ubo_data.u_resolution_scale = m_resolution_scale;
m_batch_ubo_data.u_true_color = m_true_color ? 1u : 0u;
m_batch_ubo_data.u_scaled_dithering = m_scaled_dithering ? 1u : 0u;
UpdateSoftwareRenderer(false);
return true;
}
void GPU_HW::Reset(bool clear_vram)
{
GPU::Reset(clear_vram);
m_batch_current_vertex_ptr = m_batch_start_vertex_ptr;
m_vram_shadow.fill(0);
if (m_sw_renderer)
m_sw_renderer->Reset(clear_vram);
m_batch = {};
m_batch_ubo_data = {};
m_batch_ubo_dirty = true;
m_current_depth = 1;
SetFullVRAMDirtyRectangle();
}
bool GPU_HW::DoState(StateWrapper& sw, HostDisplayTexture** host_texture, bool update_display)
{
if (!GPU::DoState(sw, host_texture, update_display))
return false;
// invalidate the whole VRAM read texture when loading state
if (sw.IsReading())
{
m_batch_current_vertex_ptr = m_batch_start_vertex_ptr;
SetFullVRAMDirtyRectangle();
ResetBatchVertexDepth();
}
return true;
}
void GPU_HW::UpdateHWSettings(bool* framebuffer_changed, bool* shaders_changed,
bool* only_dim_changed, bool* downsample_changed)
{
const uint32_t resolution_scale = CalculateResolutionScale();
const uint32_t multisamples = std::min(m_max_multisamples, g_settings.gpu_multisamples);
const bool per_sample_shading = g_settings.gpu_per_sample_shading && m_supports_per_sample_shading;
const GPUDownsampleMode downsample_mode = GetDownsampleMode(resolution_scale);
const bool use_uv_limits = ShouldUseUVLimits();
const bool disable_color_perspective = m_supports_disable_color_perspective && ShouldDisableColorPerspective();
*framebuffer_changed =
(m_resolution_scale != resolution_scale || m_multisamples != multisamples ||
// Downsample mode only changes framebuffer dimensions when Adaptive is
// involved (Adaptive uses VRAM_WIDTH * res_scale for the display
// texture and creates an additional weight texture; Disabled and Box
// both use GPU_MAX_DISPLAY_WIDTH * res_scale and only differ in
// whether the downsample texture / framebuffer chain exists at all).
// The backend's UpdateSettings handler picks up the Disabled <-> Box
// and other non-Adaptive downsample transitions via the dedicated
// downsample_changed out-parameter below, which does NOT trigger the
// full ReadVRAM -> CreateFramebuffer -> UpdateVRAM round-trip.
(m_downsample_mode != downsample_mode &&
(m_downsample_mode == GPUDownsampleMode::Adaptive || downsample_mode == GPUDownsampleMode::Adaptive)));
// Split the shader-affecting setting comparison into "cache-
// dimensioned settings changed" and "non-dimensioned settings
// changed". A change confined to dimensioned settings can be
// served by a backend that keeps a per-(filter, true_color,
// scaled_dithering) sub-cube of batch pipelines populated across
// toggles - the previous sub-cube's PSOs are still valid and
// reachable, so DestroyPipelines can be skipped and
// CompilePipelines just lazy-populates the new sub-cube on top of
// whatever was already there. Any non-dimensioned change
// (resolution scale, MSAA, per-sample shading, UV limits, chroma
// smoothing, PGXP depth, colour perspective, precompile mode)
// flips per-session spec constants or structural SPIR-V blob
// choice applied to EVERY sub-cube and therefore requires a full
// flush.
//
// Downsample mode is intentionally NOT in either diff list - it
// does not affect the batch matrix at all (no spec const, no
// structural SPIR-V choice). Downsample mode transitions are
// surfaced separately via downsample_changed and serviced by the
// backend without touching the batch pipeline cache.
//
// GPUTextureFilter, m_true_color and m_scaled_dithering are the
// three settings the Vulkan backend currently dimensions over.
// The set may extend to other 2-value spec consts in the future
// without changing this API.
const bool filter_diff = (m_texture_filtering != g_settings.gpu_texture_filter);
const bool true_color_diff = (m_true_color != g_settings.gpu_true_color);
const bool scaled_dithering_diff = (m_scaled_dithering != g_settings.gpu_scaled_dithering);
const bool dim_diff = filter_diff || true_color_diff || scaled_dithering_diff;
const bool non_dim_diff =
(m_resolution_scale != resolution_scale || m_multisamples != multisamples ||
m_per_sample_shading != per_sample_shading ||
m_using_uv_limits != use_uv_limits || m_chroma_smoothing != g_settings.gpu_24bit_chroma_smoothing ||
m_pgxp_depth_buffer != g_settings.UsingPGXPDepthBuffer() ||
m_disable_color_perspective != disable_color_perspective ||
m_shader_precompile_mode != g_settings.gpu_shader_precompile_mode);
*shaders_changed = dim_diff || non_dim_diff;
if (only_dim_changed)
*only_dim_changed = dim_diff && !non_dim_diff;
if (downsample_changed)
*downsample_changed = (m_downsample_mode != downsample_mode);
m_resolution_scale = resolution_scale;
m_multisamples = multisamples;
m_per_sample_shading = per_sample_shading;
m_true_color = g_settings.gpu_true_color;
m_scaled_dithering = g_settings.gpu_scaled_dithering;
m_texture_filtering = g_settings.gpu_texture_filter;
m_using_uv_limits = use_uv_limits;
m_chroma_smoothing = g_settings.gpu_24bit_chroma_smoothing;
m_downsample_mode = downsample_mode;
m_disable_color_perspective = disable_color_perspective;
m_shader_precompile_mode = g_settings.gpu_shader_precompile_mode;
// Push per-session cbuffer fields into the batch UBO. These three
// settings used to drive shader recompiles on every flip; they now
// ride the existing per-session UBO upload that already runs on
// m_batch_ubo_dirty. Setting the flag here ensures the next
// FlushRender picks up the new values before any draw uses them.
// Toggling these settings is effectively free at the shader cache
// level on D3D11 / D3D12 / OpenGL backends, and on Vulkan it
// reduces redundant spec const churn.
m_batch_ubo_data.u_resolution_scale = m_resolution_scale;
m_batch_ubo_data.u_true_color = m_true_color ? 1u : 0u;
m_batch_ubo_data.u_scaled_dithering = m_scaled_dithering ? 1u : 0u;
m_batch_ubo_dirty = true;
if (!m_supports_dual_source_blend && TextureFilterRequiresDualSourceBlend(m_texture_filtering))
m_texture_filtering = GPUTextureFilter::Nearest;
if (m_pgxp_depth_buffer != g_settings.UsingPGXPDepthBuffer())
{
m_pgxp_depth_buffer = g_settings.UsingPGXPDepthBuffer();
m_batch.use_depth_buffer = false;
if (m_pgxp_depth_buffer)
ClearDepthBuffer();
}
UpdateSoftwareRenderer(true);
}
static uint32_t PreviousPow2(uint32_t value)
{
value |= (value >> 1);
value |= (value >> 2);
value |= (value >> 4);
value |= (value >> 8);
value |= (value >> 16);
return value - (value >> 1);
}
uint32_t GPU_HW::CalculateResolutionScale() const
{
uint32_t scale;
if (g_settings.gpu_resolution_scale != 0)
scale = std::clamp<uint32_t>(g_settings.gpu_resolution_scale, 1, m_max_resolution_scale);
else
{
// Auto scaling. When the system is starting and all borders crop is enabled, the registers are zero, and
// display_height therefore is also zero. Use the default size from the region in this case.
const int32_t height = (m_crtc_state.display_height != 0) ?
static_cast<int32_t>(m_crtc_state.display_height) :
(m_console_is_pal ? (PAL_VERTICAL_ACTIVE_END - PAL_VERTICAL_ACTIVE_START) :
(NTSC_VERTICAL_ACTIVE_END - NTSC_VERTICAL_ACTIVE_START));
const int32_t preferred_scale =
static_cast<int32_t>(std::ceil(static_cast<float>(m_host_display->GetWindowHeight()) / height));
scale = static_cast<uint32_t>(std::clamp<int32_t>(preferred_scale, 1, m_max_resolution_scale));
}
if (g_settings.gpu_downsample_mode == GPUDownsampleMode::Adaptive && m_supports_adaptive_downsampling && scale > 1 &&
!(IS_POW2(scale)))
return PreviousPow2(scale);
return scale;
}
GPUDownsampleMode GPU_HW::GetDownsampleMode(uint32_t resolution_scale) const
{
if (resolution_scale == 1)
return GPUDownsampleMode::Disabled;
if (g_settings.gpu_downsample_mode == GPUDownsampleMode::Adaptive)
return m_supports_adaptive_downsampling ? GPUDownsampleMode::Adaptive : GPUDownsampleMode::Box;
return g_settings.gpu_downsample_mode;
}
void GPU_HW::UpdateVRAMReadTexture()
{
ClearVRAMDirtyRectangle();
}
void GPU_HW::HandleFlippedQuadTextureCoordinates(BatchVertex* vertices)
{
// Taken from beetle-psx gpu_polygon.cpp
// For X/Y flipped 2D sprites, PSX games rely on a very specific rasterization behavior. If U or V is decreasing in X
// or Y, and we use the provided U/V as is, we will sample the wrong texel as interpolation covers an entire pixel,
// while PSX samples its interpolation essentially in the top-left corner and splats that interpolant across the
// entire pixel. While we could emulate this reasonably well in native resolution by shifting our vertex coords by
// 0.5, this breaks in upscaling scenarios, because we have several samples per native sample and we need NN rules to
// hit the same UV every time. One approach here is to use interpolate at offset or similar tricks to generalize the
// PSX interpolation patterns, but the problem is that vertices sharing an edge will no longer see the same UV (due to
// different plane derivatives), we end up sampling outside the intended boundary and artifacts are inevitable, so the
// only case where we can apply this fixup is for "sprites" or similar which should not share edges, which leads to
// this unfortunate code below.
// It might be faster to do more direct checking here, but the code below handles primitives in any order and
// orientation, and is far more SIMD-friendly if needed.
const float abx = vertices[1].x - vertices[0].x;
const float aby = vertices[1].y - vertices[0].y;
const float bcx = vertices[2].x - vertices[1].x;
const float bcy = vertices[2].y - vertices[1].y;
const float cax = vertices[0].x - vertices[2].x;
const float cay = vertices[0].y - vertices[2].y;
// Compute static derivatives, just assume W is uniform across the primitive and that the plane equation remains the
// same across the quad. (which it is, there is no Z.. yet).
const float dudx = -aby * static_cast<float>(vertices[2].u) - bcy * static_cast<float>(vertices[0].u) -
cay * static_cast<float>(vertices[1].u);
const float dvdx = -aby * static_cast<float>(vertices[2].v) - bcy * static_cast<float>(vertices[0].v) -
cay * static_cast<float>(vertices[1].v);
const float dudy = +abx * static_cast<float>(vertices[2].u) + bcx * static_cast<float>(vertices[0].u) +
cax * static_cast<float>(vertices[1].u);
const float dvdy = +abx * static_cast<float>(vertices[2].v) + bcx * static_cast<float>(vertices[0].v) +
cax * static_cast<float>(vertices[1].v);
const float area = bcx * cay - bcy * cax;
// Detect and reject any triangles with 0 size texture area
const int32_t texArea = (vertices[1].u - vertices[0].u) * (vertices[2].v - vertices[0].v) -
(vertices[2].u - vertices[0].u) * (vertices[1].v - vertices[0].v);
// Leverage PGXP to further avoid 3D polygons that just happen to align this way after projection
const bool is_3d = (vertices[0].w != vertices[1].w || vertices[0].w != vertices[2].w);
// Shouldn't matter as degenerate primitives will be culled anyways.
if (area == 0.0f || texArea == 0 || is_3d)
return;
// Use floats here as it'll be faster than integer divides.
const float rcp_area = 1.0f / area;
const float dudx_area = dudx * rcp_area;
const float dudy_area = dudy * rcp_area;
const float dvdx_area = dvdx * rcp_area;
const float dvdy_area = dvdy * rcp_area;
const bool neg_dudx = dudx_area < 0.0f;
const bool neg_dudy = dudy_area < 0.0f;
const bool neg_dvdx = dvdx_area < 0.0f;
const bool neg_dvdy = dvdy_area < 0.0f;
const bool zero_dudx = dudx_area == 0.0f;
const bool zero_dudy = dudy_area == 0.0f;
const bool zero_dvdx = dvdx_area == 0.0f;
const bool zero_dvdy = dvdy_area == 0.0f;
// If we have negative dU or dV in any direction, increment the U or V to work properly with nearest-neighbor in
// this impl. If we don't have 1:1 pixel correspondence, this creates a slight "shift" in the sprite, but we
// guarantee that we don't sample garbage at least. Overall, this is kinda hacky because there can be legitimate,
// rare cases where 3D meshes hit this scenario, and a single texel offset can pop in, but this is way better than
// having borked 2D overall.
//
// TODO: If perf becomes an issue, we can probably SIMD the 8 comparisons above,
// create an 8-bit code, and use a LUT to get the offsets.
// Case 1: U is decreasing in X, but no change in Y.
// Case 2: U is decreasing in Y, but no change in X.
// Case 3: V is decreasing in X, but no change in Y.
// Case 4: V is decreasing in Y, but no change in X.
if ((neg_dudx && zero_dudy) || (neg_dudy && zero_dudx))
{
vertices[0].u++;
vertices[1].u++;
vertices[2].u++;
vertices[3].u++;
}
if ((neg_dvdx && zero_dvdy) || (neg_dvdy && zero_dvdx))
{
vertices[0].v++;
vertices[1].v++;
vertices[2].v++;
vertices[3].v++;
}
}
void GPU_HW::ComputePolygonUVLimits(BatchVertex* vertices, uint32_t num_vertices)
{
uint16_t min_u = vertices[0].u, max_u = vertices[0].u, min_v = vertices[0].v, max_v = vertices[0].v;
for (uint32_t i = 1; i < num_vertices; i++)
{
min_u = std::min<uint16_t>(min_u, vertices[i].u);
max_u = std::max<uint16_t>(max_u, vertices[i].u);
min_v = std::min<uint16_t>(min_v, vertices[i].v);
max_v = std::max<uint16_t>(max_v, vertices[i].v);
}
if (min_u != max_u)
max_u--;
if (min_v != max_v)
max_v--;
for (uint32_t i = 0; i < num_vertices; i++)
vertices[i].uv_limits = BatchVertex::PackUVLimits(min_u, max_u, min_v, max_v);
}
void GPU_HW::SetBatchDepthBuffer(bool enabled)
{
if (GetBatchVertexCount() > 0)
{
FlushRender();
EnsureVertexBufferSpaceForCurrentCommand();
}
m_batch.use_depth_buffer = enabled;
}
void GPU_HW::CheckForDepthClear(const BatchVertex* vertices, uint32_t num_vertices)
{
float average_z;
if (num_vertices == 3)
average_z = std::min((vertices[0].w + vertices[1].w + vertices[2].w) / 3.0f, 1.0f);
else
average_z = std::min((vertices[0].w + vertices[1].w + vertices[2].w + vertices[3].w) / 4.0f, 1.0f);
if ((average_z - m_last_depth_z) >= g_settings.gpu_pgxp_depth_clear_threshold)
{
if (GetBatchVertexCount() > 0)
{
FlushRender();
EnsureVertexBufferSpaceForCurrentCommand();
}
ClearDepthBuffer();
}
m_last_depth_z = average_z;
}
uint32_t GPU_HW::GetAdaptiveDownsamplingMipLevels() const
{
uint32_t levels = 0;
uint32_t current_width = VRAM_WIDTH * m_resolution_scale;
while (current_width >= VRAM_WIDTH)
{
levels++;
current_width /= 2;
}
return levels;
}
GPU_HW::SmoothingUBOData GPU_HW::GetSmoothingUBO(uint32_t level, uint32_t left, uint32_t top, uint32_t width, uint32_t height, uint32_t tex_width,
uint32_t tex_height) const
{
const float rcp_width = 1.0f / static_cast<float>(tex_width >> level);
const float rcp_height = 1.0f / static_cast<float>(tex_height >> level);
SmoothingUBOData data;
data.min_uv[0] = static_cast<float>(left >> level) * rcp_width;
data.min_uv[1] = static_cast<float>(top >> level) * rcp_height;
data.max_uv[0] = static_cast<float>((left + width) >> level) * rcp_width;
data.max_uv[1] = static_cast<float>((top + height) >> level) * rcp_height;
data.rcp_size[0] = rcp_width;
data.rcp_size[1] = rcp_height;
return data;
}
void GPU_HW::DrawLine(float x0, float y0, uint32_t col0, float x1, float y1, uint32_t col1, float depth)
{
const float dx = x1 - x0;
const float dy = y1 - y0;
std::array<BatchVertex, 4> output;
if (dx == 0.0f && dy == 0.0f)
{
// Degenerate, render a point.
output[0].Set(x0, y0, depth, 1.0f, col0, 0, 0, 0);
output[1].Set(x0 + 1.0f, y0, depth, 1.0f, col0, 0, 0, 0);
output[2].Set(x1, y1 + 1.0f, depth, 1.0f, col0, 0, 0, 0);
output[3].Set(x1 + 1.0f, y1 + 1.0f, depth, 1.0f, col0, 0, 0, 0);
}
else
{
const float abs_dx = std::fabs(dx);
const float abs_dy = std::fabs(dy);
float fill_dx, fill_dy;
float dxdk, dydk;
float pad_x0 = 0.0f;
float pad_x1 = 0.0f;
float pad_y0 = 0.0f;
float pad_y1 = 0.0f;
// Check for vertical or horizontal major lines.
// When expanding to a rect, do so in the appropriate direction.
// FIXME: This scheme seems to kinda work, but it seems very hard to find a method
// that looks perfect on every game.
// Vagrant Story speech bubbles are a very good test case here!
if (abs_dx > abs_dy)
{
fill_dx = 0.0f;
fill_dy = 1.0f;
dxdk = 1.0f;
dydk = dy / abs_dx;
if (dx > 0.0f)
{
// Right
pad_x1 = 1.0f;
pad_y1 = dydk;
}
else
{
// Left
pad_x0 = 1.0f;
pad_y0 = -dydk;
}
}
else
{
fill_dx = 1.0f;
fill_dy = 0.0f;
dydk = 1.0f;
dxdk = dx / abs_dy;
if (dy > 0.0f)
{
// Down
pad_y1 = 1.0f;
pad_x1 = dxdk;
}
else
{
// Up
pad_y0 = 1.0f;
pad_x0 = -dxdk;
}
}
const float ox0 = x0 + pad_x0;
const float oy0 = y0 + pad_y0;
const float ox1 = x1 + pad_x1;
const float oy1 = y1 + pad_y1;
output[0].Set(ox0, oy0, depth, 1.0f, col0, 0, 0, 0);
output[1].Set(ox0 + fill_dx, oy0 + fill_dy, depth, 1.0f, col0, 0, 0, 0);
output[2].Set(ox1, oy1, depth, 1.0f, col1, 0, 0, 0);
output[3].Set(ox1 + fill_dx, oy1 + fill_dy, depth, 1.0f, col1, 0, 0, 0);
}
AddVertex(output[0]);
AddVertex(output[1]);
AddVertex(output[2]);
AddVertex(output[3]);
AddVertex(output[2]);
AddVertex(output[1]);
}
void GPU_HW::LoadVertices()
{
if (m_GPUSTAT.check_mask_before_draw)
m_current_depth++;
const GPURenderCommand rc{m_render_command.bits};
const uint32_t texpage = static_cast<uint32_t>(m_draw_mode.mode_reg.bits) | (static_cast<uint32_t>(m_draw_mode.palette_reg) << 16);
const float depth = GetCurrentNormalizedVertexDepth();
switch (rc.primitive)
{
case GPUPrimitive::Polygon:
{
uint16_t native_texcoords[4];
const uint32_t first_color = rc.color_for_first_vertex;
const bool shaded = rc.shading_enable;
const bool textured = rc.texture_enable;
const bool pgxp = g_settings.gpu_pgxp_enable;
const uint32_t num_vertices = rc.quad_polygon ? 4 : 3;
std::array<BatchVertex, 4> vertices;
std::array<std::array<int32_t, 2>, 4> native_vertex_positions;
bool valid_w = g_settings.gpu_pgxp_texture_correction;
for (uint32_t i = 0; i < num_vertices; i++)
{
const uint32_t color = (shaded && i > 0) ? (FifoPop() & UINT32_C(0x00FFFFFF)) : first_color;
const uint64_t maddr_and_pos = m_fifo.Pop();
const GPUVertexPosition vp{static_cast<uint32_t>(maddr_and_pos)};
const uint16_t texcoord = textured ? static_cast<uint16_t>(FifoPop()) : 0;
const int32_t native_x = m_drawing_offset.x + vp.x;
const int32_t native_y = m_drawing_offset.y + vp.y;
native_vertex_positions[i][0] = native_x;
native_vertex_positions[i][1] = native_y;
native_texcoords[i] = texcoord;
vertices[i].Set(static_cast<float>(native_x), static_cast<float>(native_y), depth, 1.0f, color, texpage,
texcoord, 0xFFFF0000u);
if (pgxp)
{
valid_w &=
PGXP::GetPreciseVertex(static_cast<uint32_t>(maddr_and_pos >> 32), vp.bits, native_x, native_y, m_drawing_offset.x,
m_drawing_offset.y, &vertices[i].x, &vertices[i].y, &vertices[i].w);
}
}
if (pgxp)
{
if (!valid_w)
{
if (m_batch.use_depth_buffer)
SetBatchDepthBuffer(false);
for (BatchVertex& v : vertices)
v.w = 1.0f;
}
else if (g_settings.gpu_pgxp_depth_buffer)
{
const bool use_depth = (m_batch.transparency_mode == GPUTransparencyMode::Disabled);
if (m_batch.use_depth_buffer != use_depth)
SetBatchDepthBuffer(use_depth);
if (use_depth)
CheckForDepthClear(vertices.data(), num_vertices);
}
}
if (rc.quad_polygon && m_resolution_scale > 1)
HandleFlippedQuadTextureCoordinates(vertices.data());
if (m_using_uv_limits && textured)
ComputePolygonUVLimits(vertices.data(), num_vertices);
if (!IsDrawingAreaIsValid())
return;
// Cull polygons which are too large.
const auto [min_x_12, max_x_12] = MinMax(native_vertex_positions[1][0], native_vertex_positions[2][0]);
const auto [min_y_12, max_y_12] = MinMax(native_vertex_positions[1][1], native_vertex_positions[2][1]);
const int32_t min_x = std::min(min_x_12, native_vertex_positions[0][0]);
const int32_t max_x = std::max(max_x_12, native_vertex_positions[0][0]);
const int32_t min_y = std::min(min_y_12, native_vertex_positions[0][1]);
const int32_t max_y = std::max(max_y_12, native_vertex_positions[0][1]);
if ((max_x - min_x) >= MAX_PRIMITIVE_WIDTH || (max_y - min_y) >= MAX_PRIMITIVE_HEIGHT)
{
}
else
{
const uint32_t clip_left = static_cast<uint32_t>(std::clamp<int32_t>(min_x, m_drawing_area.left, m_drawing_area.right));
const uint32_t clip_right = static_cast<uint32_t>(std::clamp<int32_t>(max_x, m_drawing_area.left, m_drawing_area.right)) + 1u;
const uint32_t clip_top = static_cast<uint32_t>(std::clamp<int32_t>(min_y, m_drawing_area.top, m_drawing_area.bottom));
const uint32_t clip_bottom =
static_cast<uint32_t>(std::clamp<int32_t>(max_y, m_drawing_area.top, m_drawing_area.bottom)) + 1u;
m_vram_dirty_rect.Include(clip_left, clip_right, clip_top, clip_bottom);
AddDrawTriangleTicks(native_vertex_positions[0][0], native_vertex_positions[0][1],
native_vertex_positions[1][0], native_vertex_positions[1][1],
native_vertex_positions[2][0], native_vertex_positions[2][1], rc.shading_enable,
rc.texture_enable, rc.transparency_enable);
std::memcpy(m_batch_current_vertex_ptr, vertices.data(), sizeof(BatchVertex) * 3);
m_batch_current_vertex_ptr += 3;
}
// quads
if (rc.quad_polygon)
{
const int32_t min_x_123 = std::min(min_x_12, native_vertex_positions[3][0]);
const int32_t max_x_123 = std::max(max_x_12, native_vertex_positions[3][0]);
const int32_t min_y_123 = std::min(min_y_12, native_vertex_positions[3][1]);
const int32_t max_y_123 = std::max(max_y_12, native_vertex_positions[3][1]);
// Cull polygons which are too large.
if ((max_x_123 - min_x_123) >= MAX_PRIMITIVE_WIDTH || (max_y_123 - min_y_123) >= MAX_PRIMITIVE_HEIGHT)
{
}
else
{
const uint32_t clip_left = static_cast<uint32_t>(std::clamp<int32_t>(min_x_123, m_drawing_area.left, m_drawing_area.right));
const uint32_t clip_right =
static_cast<uint32_t>(std::clamp<int32_t>(max_x_123, m_drawing_area.left, m_drawing_area.right)) + 1u;
const uint32_t clip_top = static_cast<uint32_t>(std::clamp<int32_t>(min_y_123, m_drawing_area.top, m_drawing_area.bottom));
const uint32_t clip_bottom =
static_cast<uint32_t>(std::clamp<int32_t>(max_y_123, m_drawing_area.top, m_drawing_area.bottom)) + 1u;
m_vram_dirty_rect.Include(clip_left, clip_right, clip_top, clip_bottom);
AddDrawTriangleTicks(native_vertex_positions[2][0], native_vertex_positions[2][1],
native_vertex_positions[1][0], native_vertex_positions[1][1],
native_vertex_positions[3][0], native_vertex_positions[3][1], rc.shading_enable,
rc.texture_enable, rc.transparency_enable);
AddVertex(vertices[2]);
AddVertex(vertices[1]);
AddVertex(vertices[3]);
}
}
if (m_sw_renderer)
{
GPUBackendDrawPolygonCommand* cmd = m_sw_renderer->NewDrawPolygonCommand(num_vertices);
FillDrawCommand(cmd, rc);
for (uint32_t i = 0; i < num_vertices; i++)
{
GPUBackendDrawPolygonCommand::Vertex* vert = &cmd->vertices[i];
vert->x = native_vertex_positions[i][0];
vert->y = native_vertex_positions[i][1];
vert->texcoord = native_texcoords[i];
vert->color = vertices[i].color;
}
m_sw_renderer->PushCommand(cmd);
}
}
break;
case GPUPrimitive::Rectangle:
{
const uint32_t color = rc.color_for_first_vertex;
const GPUVertexPosition vp{FifoPop()};
const int32_t pos_x = TruncateGPUVertexPosition(m_drawing_offset.x + vp.x);
const int32_t pos_y = TruncateGPUVertexPosition(m_drawing_offset.y + vp.y);
const auto [texcoord_x, texcoord_y] = UnpackTexcoord(rc.texture_enable ? static_cast<uint16_t>(FifoPop()) : 0);
uint16_t orig_tex_left = static_cast<uint16_t>(texcoord_x);
uint16_t orig_tex_top = static_cast<uint16_t>(texcoord_y);
int32_t rectangle_width;
int32_t rectangle_height;
switch (rc.rectangle_size)
{
case GPUDrawRectangleSize::R1x1:
rectangle_width = 1;
rectangle_height = 1;
break;
case GPUDrawRectangleSize::R8x8:
rectangle_width = 8;
rectangle_height = 8;
break;
case GPUDrawRectangleSize::R16x16:
rectangle_width = 16;
rectangle_height = 16;
break;
default:
{
const uint32_t width_and_height = FifoPop();
rectangle_width = static_cast<int32_t>(width_and_height & VRAM_WIDTH_MASK);
rectangle_height = static_cast<int32_t>((width_and_height >> 16) & VRAM_HEIGHT_MASK);
if (rectangle_width >= MAX_PRIMITIVE_WIDTH || rectangle_height >= MAX_PRIMITIVE_HEIGHT)
return;
}
break;
}
if (!IsDrawingAreaIsValid())
return;
// we can split the rectangle up into potentially 8 quads
if (m_batch.use_depth_buffer)
SetBatchDepthBuffer(false);
// Split the rectangle into multiple quads if it's greater than 256x256, as the texture page should repeat.
uint16_t tex_top = orig_tex_top;
for (int32_t y_offset = 0; y_offset < rectangle_height;)
{
const int32_t quad_height = std::min<int32_t>(rectangle_height - y_offset, TEXTURE_PAGE_WIDTH - tex_top);
const float quad_start_y = static_cast<float>(pos_y + y_offset);
const float quad_end_y = quad_start_y + static_cast<float>(quad_height);
const uint16_t tex_bottom = tex_top + static_cast<uint16_t>(quad_height);
uint16_t tex_left = orig_tex_left;
for (int32_t x_offset = 0; x_offset < rectangle_width;)
{
const int32_t quad_width = std::min<int32_t>(rectangle_width - x_offset, TEXTURE_PAGE_HEIGHT - tex_left);
const float quad_start_x = static_cast<float>(pos_x + x_offset);
const float quad_end_x = quad_start_x + static_cast<float>(quad_width);
const uint16_t tex_right = tex_left + static_cast<uint16_t>(quad_width);
const uint32_t uv_limits = BatchVertex::PackUVLimits(tex_left, tex_right - 1, tex_top, tex_bottom - 1);
AddNewVertex(quad_start_x, quad_start_y, depth, 1.0f, color, texpage, tex_left, tex_top, uv_limits);
AddNewVertex(quad_end_x, quad_start_y, depth, 1.0f, color, texpage, tex_right, tex_top, uv_limits);
AddNewVertex(quad_start_x, quad_end_y, depth, 1.0f, color, texpage, tex_left, tex_bottom, uv_limits);
AddNewVertex(quad_start_x, quad_end_y, depth, 1.0f, color, texpage, tex_left, tex_bottom, uv_limits);
AddNewVertex(quad_end_x, quad_start_y, depth, 1.0f, color, texpage, tex_right, tex_top, uv_limits);
AddNewVertex(quad_end_x, quad_end_y, depth, 1.0f, color, texpage, tex_right, tex_bottom, uv_limits);
x_offset += quad_width;
tex_left = 0;
}
y_offset += quad_height;
tex_top = 0;
}
const uint32_t clip_left = static_cast<uint32_t>(std::clamp<int32_t>(pos_x, m_drawing_area.left, m_drawing_area.right));
const uint32_t clip_right =
static_cast<uint32_t>(std::clamp<int32_t>(pos_x + rectangle_width, m_drawing_area.left, m_drawing_area.right)) + 1u;
const uint32_t clip_top = static_cast<uint32_t>(std::clamp<int32_t>(pos_y, m_drawing_area.top, m_drawing_area.bottom));
const uint32_t clip_bottom =
static_cast<uint32_t>(std::clamp<int32_t>(pos_y + rectangle_height, m_drawing_area.top, m_drawing_area.bottom)) + 1u;
m_vram_dirty_rect.Include(clip_left, clip_right, clip_top, clip_bottom);
AddDrawRectangleTicks(clip_right - clip_left, clip_bottom - clip_top, rc.texture_enable, rc.transparency_enable);
if (m_sw_renderer)
{
GPUBackendDrawRectangleCommand* cmd = m_sw_renderer->NewDrawRectangleCommand();
FillDrawCommand(cmd, rc);
cmd->color = color;
cmd->x = pos_x;
cmd->y = pos_y;
cmd->width = static_cast<uint16_t>(rectangle_width);
cmd->height = static_cast<uint16_t>(rectangle_height);
cmd->texcoord = (static_cast<uint16_t>(texcoord_y) << 8) | static_cast<uint16_t>(texcoord_x);
m_sw_renderer->PushCommand(cmd);
}
}
break;
case GPUPrimitive::Line:
{
if (m_batch.use_depth_buffer)
SetBatchDepthBuffer(false);
if (!rc.polyline)
{
uint32_t start_color, end_color;
GPUVertexPosition start_pos, end_pos;
if (rc.shading_enable)
{
start_color = rc.color_for_first_vertex;
start_pos.bits = FifoPop();
end_color = FifoPop() & UINT32_C(0x00FFFFFF);
end_pos.bits = FifoPop();
}
else
{
start_color = end_color = rc.color_for_first_vertex;
start_pos.bits = FifoPop();
end_pos.bits = FifoPop();
}
if (!IsDrawingAreaIsValid())
return;
int32_t start_x = start_pos.x + m_drawing_offset.x;
int32_t start_y = start_pos.y + m_drawing_offset.y;
int32_t end_x = end_pos.x + m_drawing_offset.x;
int32_t end_y = end_pos.y + m_drawing_offset.y;
const auto [min_x, max_x] = MinMax(start_x, end_x);
const auto [min_y, max_y] = MinMax(start_y, end_y);
if ((max_x - min_x) >= MAX_PRIMITIVE_WIDTH || (max_y - min_y) >= MAX_PRIMITIVE_HEIGHT)
return;
const uint32_t clip_left = static_cast<uint32_t>(std::clamp<int32_t>(min_x, m_drawing_area.left, m_drawing_area.right));
const uint32_t clip_right = static_cast<uint32_t>(std::clamp<int32_t>(max_x, m_drawing_area.left, m_drawing_area.right)) + 1u;
const uint32_t clip_top = static_cast<uint32_t>(std::clamp<int32_t>(min_y, m_drawing_area.top, m_drawing_area.bottom));
const uint32_t clip_bottom =
static_cast<uint32_t>(std::clamp<int32_t>(max_y, m_drawing_area.top, m_drawing_area.bottom)) + 1u;
m_vram_dirty_rect.Include(clip_left, clip_right, clip_top, clip_bottom);
AddDrawLineTicks(clip_right - clip_left, clip_bottom - clip_top, rc.shading_enable);
// TODO: Should we do a PGXP lookup here? Most lines are 2D.
DrawLine(static_cast<float>(start_x), static_cast<float>(start_y), start_color, static_cast<float>(end_x),
static_cast<float>(end_y), end_color, depth);
if (m_sw_renderer)
{
GPUBackendDrawLineCommand* cmd = m_sw_renderer->NewDrawLineCommand(2);
FillDrawCommand(cmd, rc);
cmd->vertices[0].Set(start_x, start_y, start_color);
cmd->vertices[1].Set(end_x, end_y, end_color);
m_sw_renderer->PushCommand(cmd);
}
}
else
{
// Multiply by two because we don't use line strips.
const uint32_t num_vertices = GetPolyLineVertexCount();
if (!IsDrawingAreaIsValid())
return;
const bool shaded = rc.shading_enable;
uint32_t buffer_pos = 0;
const GPUVertexPosition start_vp{m_blit_buffer[buffer_pos++]};
int32_t start_x = start_vp.x + m_drawing_offset.x;
int32_t start_y = start_vp.y + m_drawing_offset.y;
uint32_t start_color = rc.color_for_first_vertex;
GPUBackendDrawLineCommand* cmd;
if (m_sw_renderer)
{
cmd = m_sw_renderer->NewDrawLineCommand(num_vertices);
FillDrawCommand(cmd, rc);
cmd->vertices[0].Set(start_x, start_y, start_color);
}
else
{
cmd = nullptr;
}
for (uint32_t i = 1; i < num_vertices; i++)
{
const uint32_t end_color = shaded ? (m_blit_buffer[buffer_pos++] & UINT32_C(0x00FFFFFF)) : start_color;
const GPUVertexPosition vp{m_blit_buffer[buffer_pos++]};
const int32_t end_x = m_drawing_offset.x + vp.x;
const int32_t end_y = m_drawing_offset.y + vp.y;
const auto [min_x, max_x] = MinMax(start_x, end_x);
const auto [min_y, max_y] = MinMax(start_y, end_y);
if ((max_x - min_x) >= MAX_PRIMITIVE_WIDTH || (max_y - min_y) >= MAX_PRIMITIVE_HEIGHT)
{
}
else
{
const uint32_t clip_left = static_cast<uint32_t>(std::clamp<int32_t>(min_x, m_drawing_area.left, m_drawing_area.right));
const uint32_t clip_right =
static_cast<uint32_t>(std::clamp<int32_t>(max_x, m_drawing_area.left, m_drawing_area.right)) + 1u;
const uint32_t clip_top = static_cast<uint32_t>(std::clamp<int32_t>(min_y, m_drawing_area.top, m_drawing_area.bottom));
const uint32_t clip_bottom =
static_cast<uint32_t>(std::clamp<int32_t>(max_y, m_drawing_area.top, m_drawing_area.bottom)) + 1u;
m_vram_dirty_rect.Include(clip_left, clip_right, clip_top, clip_bottom);
AddDrawLineTicks(clip_right - clip_left, clip_bottom - clip_top, rc.shading_enable);
// TODO: Should we do a PGXP lookup here? Most lines are 2D.
DrawLine(static_cast<float>(start_x), static_cast<float>(start_y), start_color, static_cast<float>(end_x),
static_cast<float>(end_y), end_color, depth);
}
start_x = end_x;
start_y = end_y;
start_color = end_color;
if (cmd)
cmd->vertices[i].Set(end_x, end_y, end_color);
}
if (cmd)
m_sw_renderer->PushCommand(cmd);
}
}
break;
default:
break;
}
}
void GPU_HW::CalcScissorRect(int* left, int* top, int* right, int* bottom)
{
*left = m_drawing_area.left * m_resolution_scale;
*right = std::max<uint32_t>((m_drawing_area.right + 1) * m_resolution_scale, *left + 1);
*top = m_drawing_area.top * m_resolution_scale;
*bottom = std::max<uint32_t>((m_drawing_area.bottom + 1) * m_resolution_scale, *top + 1);
}
GPU_HW::VRAMFillUBOData GPU_HW::GetVRAMFillUBOData(uint32_t x, uint32_t y, uint32_t width, uint32_t height, uint32_t color) const
{
// drop precision unless true colour is enabled
if (!m_true_color)
color = VRAMRGBA5551ToRGBA8888(VRAMRGBA8888ToRGBA5551(color));
VRAMFillUBOData uniforms;
uniforms.u_dst_x = (x % VRAM_WIDTH) * m_resolution_scale;
uniforms.u_dst_y = (y % VRAM_HEIGHT) * m_resolution_scale;
uniforms.u_end_x = ((x + width) % VRAM_WIDTH) * m_resolution_scale;
uniforms.u_end_y = ((y + height) % VRAM_HEIGHT) * m_resolution_scale;
std::tie(uniforms.u_fill_color[0], uniforms.u_fill_color[1], uniforms.u_fill_color[2], uniforms.u_fill_color[3]) =
RGBA8ToFloat(color);
uniforms.u_interlaced_displayed_field = GetActiveLineLSB();
return uniforms;
}
Common::Rectangle<uint32_t> GPU_HW::GetVRAMTransferBounds(uint32_t x, uint32_t y, uint32_t width, uint32_t height) const
{
Common::Rectangle<uint32_t> out_rc = Common::Rectangle<uint32_t>::FromExtents(x % VRAM_WIDTH, y % VRAM_HEIGHT, width, height);
if (out_rc.right > VRAM_WIDTH)
{
out_rc.left = 0;
out_rc.right = VRAM_WIDTH;
}
if (out_rc.bottom > VRAM_HEIGHT)
{
out_rc.top = 0;
out_rc.bottom = VRAM_HEIGHT;
}
return out_rc;
}
GPU_HW::VRAMWriteUBOData GPU_HW::GetVRAMWriteUBOData(uint32_t x, uint32_t y, uint32_t width, uint32_t height, uint32_t buffer_offset,
bool set_mask, bool check_mask) const
{
const VRAMWriteUBOData uniforms = {
(x % VRAM_WIDTH), (y % VRAM_HEIGHT), ((x + width) % VRAM_WIDTH), ((y + height) % VRAM_HEIGHT), width,
height, buffer_offset, (set_mask) ? 0x8000u : 0x00, GetCurrentNormalizedVertexDepth()};
return uniforms;
}
bool GPU_HW::UseVRAMCopyShader(uint32_t src_x, uint32_t src_y, uint32_t dst_x, uint32_t dst_y, uint32_t width, uint32_t height) const
{
// masking enabled, oversized, or overlapping
return (m_GPUSTAT.IsMaskingEnabled() || ((src_x % VRAM_WIDTH) + width) > VRAM_WIDTH ||
((src_y % VRAM_HEIGHT) + height) > VRAM_HEIGHT || ((dst_x % VRAM_WIDTH) + width) > VRAM_WIDTH ||
((dst_y % VRAM_HEIGHT) + height) > VRAM_HEIGHT ||
Common::Rectangle<uint32_t>::FromExtents(src_x, src_y, width, height)
.Intersects(Common::Rectangle<uint32_t>::FromExtents(dst_x, dst_y, width, height)));
}
GPU_HW::VRAMCopyUBOData GPU_HW::GetVRAMCopyUBOData(uint32_t src_x, uint32_t src_y, uint32_t dst_x, uint32_t dst_y, uint32_t width,
uint32_t height) const
{
const VRAMCopyUBOData uniforms = {(src_x % VRAM_WIDTH) * m_resolution_scale,
(src_y % VRAM_HEIGHT) * m_resolution_scale,
(dst_x % VRAM_WIDTH) * m_resolution_scale,
(dst_y % VRAM_HEIGHT) * m_resolution_scale,
((dst_x + width) % VRAM_WIDTH) * m_resolution_scale,
((dst_y + height) % VRAM_HEIGHT) * m_resolution_scale,
width * m_resolution_scale,
height * m_resolution_scale,
m_GPUSTAT.set_mask_while_drawing ? 1u : 0u,
GetCurrentNormalizedVertexDepth()};
return uniforms;
}
void GPU_HW::IncludeVRAMDirtyRectangle(const Common::Rectangle<uint32_t>& rect)
{
m_vram_dirty_rect.Include(rect);
// the vram area can include the texture page, but the game can leave it as-is. in this case, set it as dirty so the
// shadow texture is updated
if (!m_draw_mode.IsTexturePageChanged() &&
(m_draw_mode.mode_reg.GetTexturePageRectangle().Intersects(rect) ||
(m_draw_mode.mode_reg.IsUsingPalette() && m_draw_mode.GetTexturePaletteRectangle().Intersects(rect))))
{
m_draw_mode.SetTexturePageChanged();
}
}
void GPU_HW::EnsureVertexBufferSpaceForCurrentCommand()
{
uint32_t required_vertices;
switch (m_render_command.primitive)
{
case GPUPrimitive::Polygon:
required_vertices = m_render_command.quad_polygon ? 6 : 3;
break;
case GPUPrimitive::Rectangle:
required_vertices = MAX_VERTICES_FOR_RECTANGLE;
break;
case GPUPrimitive::Line:
default:
required_vertices = m_render_command.polyline ? (GetPolyLineVertexCount() * 6u) : 6u;
break;
}
// can we fit these vertices in the current depth buffer range?
if ((m_current_depth + required_vertices) > MAX_BATCH_VERTEX_COUNTER_IDS)
{
// implies FlushRender()
ResetBatchVertexDepth();
}
else if (m_batch_current_vertex_ptr)
{
if (GetBatchVertexSpace() >= required_vertices)
return;
FlushRender();
}
MapBatchVertexPointer(required_vertices);
}
void GPU_HW::ResetBatchVertexDepth()
{
if (m_pgxp_depth_buffer)
return;
FlushRender();
UpdateDepthBufferFromMaskBit();
m_current_depth = 1;
}
void GPU_HW::UpdateSoftwareRenderer(bool copy_vram_from_hw)
{
const bool current_enabled = (m_sw_renderer != nullptr);
const bool new_enabled = g_settings.gpu_use_software_renderer_for_readbacks;
if (current_enabled == new_enabled)
return;
m_vram_ptr = m_vram_shadow.data();
if (!new_enabled)
{
if (m_sw_renderer)
m_sw_renderer->Shutdown();
m_sw_renderer.reset();
return;
}
std::unique_ptr<GPU_SW_Backend> sw_renderer = std::make_unique<GPU_SW_Backend>();
if (!sw_renderer->Initialize(true))
return;
// We need to fill in the SW renderer's VRAM with the current state for hot toggles.
if (copy_vram_from_hw)
{
FlushRender();
ReadVRAM(0, 0, VRAM_WIDTH, VRAM_HEIGHT);
std::memcpy(sw_renderer->GetVRAM(), m_vram_ptr, sizeof(uint16_t) * VRAM_WIDTH * VRAM_HEIGHT);
// Sync the drawing area.
GPUBackendSetDrawingAreaCommand* cmd = sw_renderer->NewSetDrawingAreaCommand();
cmd->new_area = m_drawing_area;
sw_renderer->PushCommand(cmd);
}
m_sw_renderer = std::move(sw_renderer);
m_vram_ptr = m_sw_renderer->GetVRAM();
}
void GPU_HW::FillBackendCommandParameters(GPUBackendCommand* cmd) const
{
cmd->params.bits = 0;
cmd->params.check_mask_before_draw = m_GPUSTAT.check_mask_before_draw;
cmd->params.set_mask_while_drawing = m_GPUSTAT.set_mask_while_drawing;
cmd->params.active_line_lsb = m_crtc_state.active_line_lsb;
cmd->params.interlaced_rendering = m_GPUSTAT.SkipDrawingToActiveField();
}
void GPU_HW::FillDrawCommand(GPUBackendDrawCommand* cmd, GPURenderCommand rc) const
{
FillBackendCommandParameters(cmd);
cmd->rc.bits = rc.bits;
cmd->draw_mode.bits = m_draw_mode.mode_reg.bits;
cmd->palette.bits = m_draw_mode.palette_reg;
cmd->window = m_draw_mode.texture_window;
}
void GPU_HW::ReadSoftwareRendererVRAM(uint32_t x, uint32_t y, uint32_t width, uint32_t height)
{
m_sw_renderer->Sync(false);
}
void GPU_HW::UpdateSoftwareRendererVRAM(uint32_t x, uint32_t y, uint32_t width, uint32_t height, const void* data, bool set_mask,
bool check_mask)
{
const uint32_t num_words = width * height;
GPUBackendUpdateVRAMCommand* cmd = m_sw_renderer->NewUpdateVRAMCommand(num_words);
FillBackendCommandParameters(cmd);
cmd->params.set_mask_while_drawing = set_mask;
cmd->params.check_mask_before_draw = check_mask;
cmd->x = static_cast<uint16_t>(x);
cmd->y = static_cast<uint16_t>(y);
cmd->width = static_cast<uint16_t>(width);
cmd->height = static_cast<uint16_t>(height);
std::memcpy(cmd->data, data, sizeof(uint16_t) * num_words);
m_sw_renderer->PushCommand(cmd);
}
void GPU_HW::FillSoftwareRendererVRAM(uint32_t x, uint32_t y, uint32_t width, uint32_t height, uint32_t color)
{
GPUBackendFillVRAMCommand* cmd = m_sw_renderer->NewFillVRAMCommand();
FillBackendCommandParameters(cmd);
cmd->x = static_cast<uint16_t>(x);
cmd->y = static_cast<uint16_t>(y);
cmd->width = static_cast<uint16_t>(width);
cmd->height = static_cast<uint16_t>(height);
cmd->color = color;
m_sw_renderer->PushCommand(cmd);
}
void GPU_HW::CopySoftwareRendererVRAM(uint32_t src_x, uint32_t src_y, uint32_t dst_x, uint32_t dst_y, uint32_t width, uint32_t height)
{
GPUBackendCopyVRAMCommand* cmd = m_sw_renderer->NewCopyVRAMCommand();
FillBackendCommandParameters(cmd);
cmd->src_x = static_cast<uint16_t>(src_x);
cmd->src_y = static_cast<uint16_t>(src_y);
cmd->dst_x = static_cast<uint16_t>(dst_x);
cmd->dst_y = static_cast<uint16_t>(dst_y);
cmd->width = static_cast<uint16_t>(width);
cmd->height = static_cast<uint16_t>(height);
m_sw_renderer->PushCommand(cmd);
}
void GPU_HW::FillVRAM(uint32_t x, uint32_t y, uint32_t width, uint32_t height, uint32_t color)
{
IncludeVRAMDirtyRectangle(
Common::Rectangle<uint32_t>::FromExtents(x, y, width, height).Clamped(0, 0, VRAM_WIDTH, VRAM_HEIGHT));
}
void GPU_HW::UpdateVRAM(uint32_t x, uint32_t y, uint32_t width, uint32_t height, const void* data, bool set_mask, bool check_mask)
{
IncludeVRAMDirtyRectangle(Common::Rectangle<uint32_t>::FromExtents(x, y, width, height));
if (check_mask)
{
// set new vertex counter since we want this to take into consideration previous masked pixels
m_current_depth++;
}
}
void GPU_HW::CopyVRAM(uint32_t src_x, uint32_t src_y, uint32_t dst_x, uint32_t dst_y, uint32_t width, uint32_t height)
{
IncludeVRAMDirtyRectangle(
Common::Rectangle<uint32_t>::FromExtents(dst_x, dst_y, width, height).Clamped(0, 0, VRAM_WIDTH, VRAM_HEIGHT));
if (m_GPUSTAT.check_mask_before_draw)
{
// set new vertex counter since we want this to take into consideration previous masked pixels
m_current_depth++;
}
}
void GPU_HW::DispatchRenderCommand()
{
const GPURenderCommand rc{m_render_command.bits};
GPUTextureMode texture_mode;
if (rc.IsTexturingEnabled())
{
// texture page changed - check that the new page doesn't intersect the drawing area
if (m_draw_mode.IsTexturePageChanged())
{
m_draw_mode.ClearTexturePageChangedFlag();
if (m_vram_dirty_rect.Valid() && (m_draw_mode.mode_reg.GetTexturePageRectangle().Intersects(m_vram_dirty_rect) ||
(m_draw_mode.mode_reg.IsUsingPalette() &&
m_draw_mode.GetTexturePaletteRectangle().Intersects(m_vram_dirty_rect))))
{
if (m_batch_current_vertex_ptr != m_batch_start_vertex_ptr)
FlushRender();
UpdateVRAMReadTexture();
}
}
texture_mode = m_draw_mode.mode_reg.texture_mode;
if (rc.raw_texture_enable)
{
texture_mode =
static_cast<GPUTextureMode>(static_cast<uint8_t>(texture_mode) | static_cast<uint8_t>(GPUTextureMode::RawTextureBit));
}
}
else
{
texture_mode = GPUTextureMode::Disabled;
}
// has any state changed which requires a new batch?
const GPUTransparencyMode transparency_mode =
rc.transparency_enable ? m_draw_mode.mode_reg.transparency_mode : GPUTransparencyMode::Disabled;
const bool dithering_enable = (!m_true_color && rc.IsDitheringEnabled()) ? m_GPUSTAT.dither_enable : false;
if (texture_mode != m_batch.texture_mode || transparency_mode != m_batch.transparency_mode ||
transparency_mode == GPUTransparencyMode::BackgroundMinusForeground || dithering_enable != m_batch.dithering)
{
FlushRender();
}
EnsureVertexBufferSpaceForCurrentCommand();
// transparency mode change
if (m_batch.transparency_mode != transparency_mode && transparency_mode != GPUTransparencyMode::Disabled)
{
static constexpr float transparent_alpha[4][2] = {{0.5f, 0.5f}, {1.0f, 1.0f}, {1.0f, 1.0f}, {0.25f, 1.0f}};
const float src_alpha_factor = transparent_alpha[static_cast<uint32_t>(transparency_mode)][0];
const float dst_alpha_factor = transparent_alpha[static_cast<uint32_t>(transparency_mode)][1];
m_batch_ubo_dirty |= (m_batch_ubo_data.u_src_alpha_factor != src_alpha_factor ||
m_batch_ubo_data.u_dst_alpha_factor != dst_alpha_factor);
m_batch_ubo_data.u_src_alpha_factor = src_alpha_factor;
m_batch_ubo_data.u_dst_alpha_factor = dst_alpha_factor;
}
const bool check_mask_before_draw = m_GPUSTAT.check_mask_before_draw;
const bool set_mask_while_drawing = m_GPUSTAT.set_mask_while_drawing;
if (m_batch.check_mask_before_draw != check_mask_before_draw ||
m_batch.set_mask_while_drawing != set_mask_while_drawing)
{
m_batch.check_mask_before_draw = check_mask_before_draw;
m_batch.set_mask_while_drawing = set_mask_while_drawing;
m_batch_ubo_dirty |= (m_batch_ubo_data.u_set_mask_while_drawing != static_cast<uint32_t>(set_mask_while_drawing));
m_batch_ubo_data.u_set_mask_while_drawing = static_cast<uint32_t>(set_mask_while_drawing);
}
m_batch.interlacing = IsInterlacedRenderingEnabled();
if (m_batch.interlacing)
{
const uint32_t displayed_field = GetActiveLineLSB();
m_batch_ubo_dirty |= (m_batch_ubo_data.u_interlaced_displayed_field != displayed_field);
m_batch_ubo_data.u_interlaced_displayed_field = displayed_field;
}
// update state
m_batch.texture_mode = texture_mode;
m_batch.transparency_mode = transparency_mode;
m_batch.dithering = dithering_enable;
if (m_draw_mode.IsTextureWindowChanged())
{
m_draw_mode.ClearTextureWindowChangedFlag();
m_batch_ubo_data.u_texture_window_and[0] = static_cast<uint32_t>(m_draw_mode.texture_window.and_x);
m_batch_ubo_data.u_texture_window_and[1] = static_cast<uint32_t>(m_draw_mode.texture_window.and_y);
m_batch_ubo_data.u_texture_window_or[0] = static_cast<uint32_t>(m_draw_mode.texture_window.or_x);
m_batch_ubo_data.u_texture_window_or[1] = static_cast<uint32_t>(m_draw_mode.texture_window.or_y);
m_batch_ubo_dirty = true;
}
if (m_drawing_area_changed)
{
m_drawing_area_changed = false;
SetScissorFromDrawingArea();
if (m_pgxp_depth_buffer && m_last_depth_z < 1.0f)
ClearDepthBuffer();
if (m_sw_renderer)
{
GPUBackendSetDrawingAreaCommand* cmd = m_sw_renderer->NewSetDrawingAreaCommand();
cmd->new_area = m_drawing_area;
m_sw_renderer->PushCommand(cmd);
}
}
LoadVertices();
}
void GPU_HW::FlushRender()
{
if (!m_batch_current_vertex_ptr)
return;
const uint32_t vertex_count = GetBatchVertexCount();
UnmapBatchVertexPointer(vertex_count);
if (vertex_count == 0)
return;
if (m_batch_ubo_dirty)
{
UploadUniformBuffer(&m_batch_ubo_data, sizeof(m_batch_ubo_data));
m_batch_ubo_dirty = false;
}
if (NeedsTwoPassRendering())
{
DrawBatchVertices(BatchRenderMode::OnlyOpaque, m_batch_base_vertex, vertex_count);
DrawBatchVertices(BatchRenderMode::OnlyTransparent, m_batch_base_vertex, vertex_count);
}
else
DrawBatchVertices(m_batch.GetRenderMode(), m_batch_base_vertex, vertex_count);
}
GPU_HW::ShaderCompileProgressTracker::ShaderCompileProgressTracker(std::string title, uint32_t total)
: m_title(std::move(title)), m_min_time(Common::Timer::ConvertSecondsToValue(1.0)),
m_update_interval(Common::Timer::ConvertSecondsToValue(0.1)), m_start_time(Common::Timer::GetValue()),
m_last_update_time(0), m_progress(0), m_total(total)
{
}
void GPU_HW::ShaderCompileProgressTracker::Increment()
{
m_progress++;
const uint64_t tv = Common::Timer::GetValue();
if ((tv - m_start_time) >= m_min_time && (tv - m_last_update_time) >= m_update_interval)
{
g_host_interface->DisplayLoadingScreen(m_title.c_str(), 0, static_cast<int>(m_total), static_cast<int>(m_progress));
m_last_update_time = tv;
}
}